Troubleshooting Connectivity Issues

Having trouble connecting to Don’t worry, you’re not alone! Many Netgear extender users have experienced frustrating problems while connecting to this site. This is because it is not a regular website. It in fact is a local web address used to get to the Netgear WiFi range extender settings. The initial Netgear WiFi extender setup is done using this web address. In this article, we’ll discuss some of the most common causes of connectivity issues and explain how to fix them.

Why Is Refusing to Connect?

One of the most common connection problems is when refuses to connect. There could be several reasons for this, including poor signal strength, web browser related issues, incorrect network settings, or the Netgear extender not being properly configured. To fix this issue, first, you should check the following:

• Make sure all cables are securely connected from your Netgear extender and your router. Check that your Netgear range extender is correctly connected to your router using a damage free Ethernet cable. Also, ensure that the signal strength is good.

• Ensure that the device is powered on and receiving a non-fluctuating power supply. Take a look at the power socket for any damages. Consider replacing it if you find any fault with this.

Once you checked the above given points if you are still not able to connect to, try the following troubleshooting hacks. Not Working: Resolved

  1. Use the Default IP Address

If the web address does not seems to get you to the Netgear Genie setup page, then consider using the default IP address instead of the web address. To do this, open a web browser and type in into the address bar. This will take you to the Netgear Genie settings page. Here you can modify your settings and manage your device.

3. Confirm Right Setup Process

You need to make sure that the Netgear range extender is correctly configured and that the setup process is correctly followed. Once you have confirmed that everything is correct, you should be able to access the web address successfully.

4. Verify the Web Address

Make sure that you are using the correct web address which is Enter the correct web address without making any typos. Also, avoid entering it into the search bar of the browser.

5. Clear Browser Cache

The possibility is that the web browser is not allowing you to access the web page. It may be due to accumulated cache. Clear the cache, cookies, and browsing history first and then try to access this web address. You can also update the web browser to the latest version.

6. Use an Alternate Web Browser

If one browser is causing the issue, try using another web browser.

7. Use Another Device

Try accessing on another device. Probably the device that you are using is the possible culprit.

8. Reboot the Extender

The excessive usage of the Netgear device may have caused overheating. Thus, perform power cycling as it works wonders in such a case. Simply power off your Netgear wireless range extender and let it rest for a couple of minutes. Power it on again and check if you are able to access the web page.

9. Reset Netgear Extender

If the above mentioned tips and tricks have not been of any help then, consider resetting your Netgear range extender. This will delete the personalized settings of the device and the factory settings will be restored. To reset, first, locate the Reset button on your Netgear range extender and press it. After this, setup Netgear extender again using mywifiext. As soon as the setup is completed, you can begin accessing its network and also mywifext web page to get to the settings.


This is all about troubleshooting connection problems. We close this guide with the hope that these tips and tricks have been able to get you to resolve the connectivity issues with Now you can access this web page any time and make desired modifications to the Netgear wireless range extender.